Current location:Home > PRODUCTS

Self Adhesive Pins With Self- locking Washers

  • Category:PRODUCTS
  • Model:
  • Size:
  • Date:2016-06-12
  • 更多 0
  • 上一篇:Aluminum Semi rigid flexible duct下一篇:Flexible duct connector
    • Details

    Technical Specifications:
    *Based Plate size:  50mm*50mm   35mm*35mm
    * Nail : 2.7mm Diameter
    *Nail Material: Aluminium alloy
    *Base Metal: Hot Galvanized Steel Sheet
    *Base  Gasket: Double Sided PE foam
    *Gasket Adhesive: Acrylic Based Adhesive

    Recommended Assembly Method:
    * Operation  Temperatures:  15 to 25
    *Working Surface should be clean and dry, free of dust, grease, oil and any other loose matter.
    *Remove the protective release paper taking care not to touch the adhesive.
    *Place the hanger in the required position and press the base against the surface to be insulated.
    * Insulation can be impaled immediately and firmly locked with fastening washer.
    * the Maximum strength of adhesive is achieved after 24 hours

    Ningbo Golma-cool ventilation equipment co., Ltd

    *TEL: 86-574-88025993

    *Mobile: 0086-13957831201

    Email address:

    Copyright 2016. . All rights reserved.  Technical support:huaqi